Skip to content

HYDRAULIC PRESSES, FINISHING LINES AND COMPLETE PRODUCTION PLANTS TO MANUFACTURE CONCRETE AGGLOMERATE PRODUCTS

Previous slide
Next slide

COMPLETE PLANTS AND PRESSES FOR CONCRETE TILES AND SLABS PRODUCTION

PRESSES AND PLANTS TO PRODUCE DOUBLE LAYER TILES AND SLABS

OUTDOOR + INDOOR USES

Double layer tiles and slabs are composed of a first layer poured with a volumetric doser into the press molds and followed by a second layer composed by a semi-dry base mix which gives the required thickness and mechanical resistance.
The produced elements, usually with high thickness (up to 100 – 120 mm max) and weight, are mainly used for outdoor floorings such as sidewalks and roads paving but they are also used, duly grinded and polished for indoor flooring.

PRESSES AND PLANTS TO PRODUCE SINGLE LAYER TILES AND SLABS

INDOOR + OUTDOOR USES

Concrete marble agglomerate single layer tiles are a very attractive and elegant alternative to natural and quartz stones or ceramic tiles. These eco-friendly “concrete-based” engineered stones can be produced in different compositions and patterns, are highly fire resistant and can be re-polished throughout the years. Single-layer concrete-agglomerate slabs can be used for indoor applications such as steps and risers, vanity and kitchen tops and are equally suitable for outdoor applications such as facades and ventilated facades.

FINISHING LINES AND MACHINES

and complete "VAP" finishing lines for concrete-agglomerate outdoor and indoor products

OCEM can supply different machines for surface finishing solutions to produce so-called “Value Added Products (VAP)” according to any customer’s requirements. Different VAP plants including «wet» or «dry» finishing machines designed to process any possible concrete-agglomerate products, such as Tiles, Slabs, Wet Cast products, Pavers, Cement Blocks or Kerbstones also produced with traditional Vibro-Presses or Block making Machines.

VEGA 1200

Calibrating and Grinding Machines for PAVERS and BLOCKS

OTHER MACHINES

AUXILIARY AND COMPLEMENTARY MACHINES FOR COMPLETE TURN-KEY PLANTS

R&D - Research and Development

OCEM considers Research and Development an absolute priority to support, with the real experience, the technical evolution of its machines and complete plants.
Experienced OCEM engineers are at disposal of our customers to study and test traditional or innovative concrete-agglomerate mix designs.
OCEM R&D dept. is equipped with a dedicated press capable to manufacture double or single layer test tiles using Customer’s materials.
The produced test tiles shall be sent to certified Laboratories to state the technical parameters such as mechanical resistances, wear resistance, etc. requested by European and international standards.

OCEM MAGAZINE

New project? Interested in OCEM’s technologies?

Please fill out the form and request a quote

O.C.E.M. SRL - PROGETTO OCEM INTERNATIONAL - PROMOZIONE NEI MERCATI TARGET: RUSSIA E AUSTRALIA

Operazione/progetto co-finanziato/finanziato dal POR FESR

Toscana 2014-2020

Please, fill the form below to download the Complete Catalogue OCEM

Please, fill the form below to download the technical brochure with all technical information of the machine